kapacitor的安装及部分常用命令

  • Z时代
  • 2024-01-10
  • 分类：综合

database

Kapacitor 是一个开源框架，用来处理、监控和警告时间序列数据，它使用 TICKscript 脚本来定义任务。Kapacitor是InfluxData开源的数据处理引擎。它可以处理来自InfluxDB的流数据和批处理数据，可以周期性将InfluxDB中的数据汇总、处理后再输出到InfluxDB当中，或者告警（支持Email、HTTP、TCP、 HipChat, OpsGenie, Alerta, Sensu, PagerDuty, Slack等多种方式）。

一.安装

修改kapacitor.conf文件中的参数data_dir和[logging]的路径，重启报错，错误如下:

[XXXXXXXX kapacitor]# systemctl status kapacitor
● kapacitor.service - Time series data processing engine.
   Loaded: loaded (/usr/lib/systemd/system/kapacitor.service; disabled; vendor preset: disabled)
   Active: failed (Result: start-limit) since Fri 2019-01-2915:17:42 CST; 312ms ago
     Docs: https://github.com/influxdb/kapacitor
  Process: 28842 ExecStart=/usr/bin/kapacitord -config /etc/kapacitor/kapacitor.conf $KAPACITOR_OPTS (code=exited, status=1/FAILURE)
 Main PID: 28842 (code=exited, status=1/FAILURE)
Jan 2915:17:42  systemd[1]: Unit kapacitor.service entered failed state.
Jan 2915:17:42  systemd[1]: kapacitor.service failed.
Jan 2915:17:42  systemd[1]: kapacitor.service holdoff time over, scheduling restart.
Jan 2915:17:42  systemd[1]: Stopped Time series data processing engine..
Jan 2915:17:42  systemd[1]: start request repeated too quickly for kapacitor.service
Jan 2915:17:42  systemd[1]: Failed to start Time series data processing engine..
Jan 2915:17:42  systemd[1]: Unit kapacitor.service entered failed state.
Jan 2915:17:42  systemd[1]: kapacitor.service failed.

查看service 文件/usr/lib/systemd/system/kapacitor.service，发现启动账号为kapacitor。

 解决方案:对替换的文件授权即可

chown -R kapacitor:kapacitor data 
chown -R kapacitor:kapacitor logs

 2.调试报错

调试命令如下:

kapacitor record stream -task cpu_alert -duration 60s

报错信息：

failed to create recording file: open /var/lib/kapacitor/replay/119w1985-0101-120c-83b0-c9XXXXXXXXX.srpl: permission denied

查看报错文件的权限

 解决方案:

chown -R kapacitor:kapacitor replay

3.log过多过大，调试log打印级别

上线运行一周发现kapacitor.log有4G，过多过大。

4.服务的开启/关闭/查看

启动服务

systemctl start kapacitor.service

关闭服务

systemctl stop kapacitor.service

查看服务状态

systemctl status kapacitor.service

5.部分命令

查看已部署的task

kapacitor list tasks

如果需要调整代码，在TICKscript文件中直接编辑。调整后，重新生成task

例如某id为cpu_alert的tick

kapacitor define cpu_alert -tick cpu_alert.tick

 6. bach类型的task 注意没有-duration 参数

例如:

 kapacitor record batch -task XXXXX -duration 60s

报错信息如下:

flag provided but not defined: -duration

解释如下:

Usage: kapacitor record batch [options]
        Record the result of a InfluxDB query from a task.
        Prints the recording ID on exit.
        See "kapacitor help replay"for how to replay a recording.
Examples:
        $ kapacitor record batch -task cpu_idle -start 2015-09-01T00:00:00Z -stop 2015-09-02T00:00:00Z
                This records the result of the query defined in task "cpu_idle" and runs the query
until the queries reaches the stop time, starting at time"start" and incrementing
                by the schedule defined in the task.
        $ kapacitor record batch -task cpu_idle -past 10h
                This records the result of the query defined in task "cpu_idle" and runs the query
until the queries reaches the present time.
                The starting timefor the queries is "now - 10h" and increments by the schedule defined in the task.
Options:
-no-wait
        Do not waitfor the recording to finish.
-past string
        Set start time via "now - past".
-recording-idstring
        The ID to give to this recording. If not set an random ID is chosen.
-start string
        The start timefor the set of queries.
-stop string
        The stop timefor the set of queries (default now).
-task string
        The ID of a task. Uses the queries contained in the task.

参考资料

https://docs.influxdata.com/kapacitor/v1.5/introduction/getting-started/#test-the-task

以上是 kapacitor的安装及部分常用命令 的全部内容， 来源链接： utcz.com/z/535672.html

回到顶部