vimrc [操作系统入门]
vimrc配置
set nocompatiblecall pathogen#infect()
filetype plugin indent on
set fileencodings=utf-8,ucs-bom,gb18030,gbk,gb2312,cp936
set termencoding=utf-8
set encoding=utf-8
set fileformats=unix,dos
"ed ++ff=dos %
"set ff?
set nu
set cursorline
"set cursorcolumn
set showmatch
set tabstop=4
set shiftwidth=4
set expandtab
set autoindent
set cindent
set hlsearch
set laststatus=2
" don‘t use swp file
set noswapfile
filetype on
filetype indent on
syntax enable
syntax on
set backspace=indent,eol,start
" colorscheme desert
" colorscheme ron
colorscheme default
set t_Co=256
cabbrev q <c-r>=(getcmdtype()==‘:‘ && getcmdpos()==1 ? ‘close‘ : ‘q‘)<CR>
"NERDTree快捷键
nmap <C-n> :NERDTreeToggle <CR>
noremap .n :NERDTreeFind <CR>
" NERDTree.vim
let g:NERDTreeWinPos="right"
let g:NERDTreeWinSize=30
let g:NERDTreeShowLineNumbers=0
let g:neocomplcache_enable_at_startup = 1
"修改树的显示图标
let g:NERDTreeDirArrowExpandable = ‘+‘
let g:NERDTreeDirArrowCollapsible = ‘-‘
let NERDTreeShowHidden = 1
"打开vim时如果没有文件自动打开NERDTree
" autocmd vimenter * if !argc()|NERDTree|endif
"当NERDTree为剩下的唯一窗口时自动关闭
autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTree") && b:NERDTree.isTabTree()) | q | endif
"vim-multiple-cursors
let g:multi_cursor_use_default_mapping=0
" Default mapping
let g:multi_cursor_next_key=‘.m‘
let g:multi_cursor_prev_key=‘.p‘
let g:multi_cursor_skip_key=‘.x‘
let g:multi_cursor_quit_key=‘<Esc>‘
nmap <C-l> :TagbarToggle<CR>
"nmap <C-T> :pop<CR>
" 启动时自动focus
"let g:tagbar_ctags_bin = "$HOME/work/source/ctags/ctags"
let g:tagbar_autofocus = 0
let g:tagbar_left = 1
"let g:tagbar_width = 25
let g:tagbar_indent = 1
let g:tagbar_singleclick = 1
let g:tagbar_autoclose=1
let g:tagbar_sort = 0
let g:lightline = {
‘colorscheme‘: ‘PaperColor_light‘,
‘active‘: {
‘right‘: [[ ‘syntastic‘, ‘lineinfo‘ ], [‘percent‘],
[ ‘fileformat‘, ‘fileencoding‘, ‘filetype‘ ], [ ‘prototype‘ ] ]
},
‘component_function‘: {
‘prototype‘: ‘Tagbar_prototype‘,
},
‘subseparator‘: { ‘left‘: ‘|‘, ‘right‘: ‘|‘ }
}
function! Tagbar_prototype()
return tagbar#currenttag(‘%s‘, ‘No current tag‘) . " |"
endfunction
function! RestoreSession()
if argc() == 0
if filereadable("./.pro_session.vim")
execute ‘source ./.pro_session.vim‘
end
if filereadable("./.view.vim")
execute ‘source ./.view.vim‘
end
end
endfunction
autocmd VimEnter * call RestoreSession()
nmap <C->se
:NERDTreeClose <CR>
:TagbarClose <CR>
:cclose <CR>
:mkview! ./.view.vim <CR>
:mksession! ./.pro_session.vim <CR>
:wa <CR>
" mark 设置
nmap <F2> m
" 由于保存session之后再次打开coloschem的背景会覆盖mark故需要重新设置一次，
" 同时需要将自定义的语法高亮重新设置
nmap <leader><F2> :colorscheme ron <CR>
:set cursorline <CR>
:syn match cFunctions "<[a-zA-Z_][a-zA-Z_0-9]*>[^()]*)("me=e-2 <CR>
:syn match cFunctions "<[a-zA-Z_][a-zA-Z_0-9]*>s*("me=e-1 <CR>
:hi cFunctions gui=NONE cterm=bold ctermfg=blue <CR>
:hi PmenuSel ctermbg=White <CR>
:hi CursorLine term=bold cterm=bold guibg=Grey40 <CR>
nmap <F3> #
nmap <F4> *
nmap <leader><F5> :MarkClear<CR>
:noh<CR>
" delete the appended spaces and tabs
nmap <F5> :%s/s+$//g
" ------------------------------------------------------------------------------
nmap <F6> :set nowrap <CR>
nmap <leader><F6> :set wrap <CR>
nmap <leader>zf zf%
" ------------------------------------------------------------------------------
nnoremap <silent> <Leader>l ml:execute ‘match Search /\%‘.line(‘.‘).‘l/‘<CR>
nnoremap <silent> <Leader>lc :match<CR>
" ------------------------------------------------------------------------------
nmap <F8> :Dox <CR>
" ------------------------------------------------------------------------------
nmap <F10> :set nonu<CR>
nmap <leader><F10> :set nu<CR>
nmap .m :marks <CR>
"==================jumplist for gj================"
function! GotoJump()
jumps
let j = input("Please select your jump: ")
if j != ‘‘
let pattern = ‘vc^+‘
if j =~ pattern
let j = substitute(j, pattern, ‘‘, ‘g‘)
execute "normal " . j . "<c-i>"
else
execute "normal " . j . "<c-o>"
endif
endif
endfunction
nmap <silent>gj :call GotoJump()<CR>
nmap <F11> :set ts=4<CR>
:set expandtab<CR>
:%retab!<CR>
" ------------------------------------------------------------------------------
let g:ctrlp_max_height=15
nmap <C-j> :cnext <CR>
nmap <C-k> :cprev <CR>
nnoremap <silent> <C-p> :Files<CR>
"nmap <leader>qf <Plug>window:quickfix:toggle
nmap <leader>qf <Plug>(qf_qf_toggle)
:pc <CR>
let g:qf_auto_open_quickfix=0
let g:qf_auto_quit=1
nmap .s :cwindow<CR>
:SaveList
nmap .l :cwindow<CR>
:LoadList
" clear quickfix window
nmap .c :call setqflist([])<CR>
" ------------------------------------------------------------------------------
" cscope, quickr设置
let g:quickr_cscope_autoload_db = 0
let g:quickr_cscope_use_qf_g = 1
let g:quickr_preview_on_cursor=1
let g:gutentags_project_root=[‘.cscope‘]
let g:gutentags_add_default_project_roots = 0
"let g:gutentags_ctags_executable = "/proj/shizhai/work/source/ctags/ctags"
" 所生成的数据文件的名称 "
" let g:gutentags_ctags_tagfile = ‘.tags‘
" 将自动生成的 tags 文件全部放入 ~/.cache/tags 目录中，避免污染工程目录 "
" 检测 .cscope/不存在就新建 "
"let s:vim_tags = expand(‘./.cscope‘)
let s:vim_tags = ‘.cscope‘
"silent! call mkdir(s:vim_tags, ‘p‘)
"let g:gutentags_ctags_exclude=[]
if isdirectory(s:vim_tags)
let g:gutentags_cache_dir = s:vim_tags
let g:gutentags_file_list_command = ‘cat ./.cscope/cscope.files‘
"let s:profiletag="/proj/shizhai/work/proj/profile/ignoretags"
"if filereadable(s:profiletag)
" let s:lines = readfile(s:profiletag)
" for s:line in s:lines
" call add(g:gutentags_ctags_exclude, s:line)
" endfor
"endif
endif
"let g:gutentags_debug=1
"let g:gutentags_trace = 1
" 配置 ctags 的参数 "
if has("cscope")
set csprg=/usr/bin/cscope
set csto=1
" add any database in current directory
if filereadable(".cscope/cscope.out")
cs add .cscope/cscope.out
" else add database pointed to by environment
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
set csverb
endif
nmap cs <plug>(n_quickr_cscope_symbols)
nmap cg <plug>(n_quickr_cscope_global)
nmap cc <plug>(n_quickr_cscope_callers)
nmap cf <plug>(n_quickr_cscope_files)
nmap ci <plug>(n_quickr_cscope_includes)
nmap cd <plug>(n_quickr_cscope_functions)
"nmap <C->s :cs find s <C-R>=expand("<cword>")<CR><CR>
"nmap cs :cs find s
"nmap <C->g :cs find g <C-R>=expand("<cword>")<CR><CR>
"nmap cg :cs find g
"nmap <C->c :cs find c <C-R>=expand("<cword>")<CR><CR>
"nmap cc :cs find c
"nmap <C->t :cs find t <C-R>=expand("<cword>")<CR><CR>
"nmap <C->e :cs find e <C-R>=expand("<cword>")<CR><CR>
"nmap <C->f :cs find f <C-R>=expand("<cword>")<CR><CR>
"nmap cf :cs find f
"nmap <C->i :cs find i ^<C-R>=expand("<cword>")<CR>$<CR>
"nmap <C->d :cs find d <C-R>=expand("<cword>")<CR><CR>
map <F9> :exec "!update_tag 1 1abcdefg &"<CR>
: cs reset <CR><CR>
execute ‘augroup autoscope_buffer‘
execute ‘ autocmd!‘
execute ‘ autocmd BufWritePost * silent exec "!update_tag 0 ".expand("%")." &"‘
execute ‘ autocmd BufWritePost * silent :cs reset‘
execute ‘augroup end‘
" ------------------------------------------------------------------------------
" undo 配置
set undofile
set undodir=~/.vim/.undo
set undolevels=1000 " How many undos
set undoreload=10000 " number of lines to save for undo
"引入myjl插件可以动态remove jumplist item,注释上述
" 设置提示窗口选中条目颜色
hi PmenuSel ctermbg=White
hi CursorLine term=bold cterm=bold guibg=Grey40
hi MatchParen term=reverse ctermbg=242 guibg=Grey40
let g:acp_enableAtStartup = 1
let g:acp_behaviorKeywordLength = 1
" ------------------------------------------------------------------------------
let g:indentLine_color_term = 2
"let g:indentLine_bgcolor_term = 239
let g:indentLine_bgcolor_gui = ‘#FFFFFF‘
"let g:indentLine_char_list = [‘|‘, ‘¦‘, ‘┆‘, ‘┊‘]
"let g:indentLine_char = ‘┆‘
" ------------------------------------------------------------------------------
"新建.c,.h,.sh,.java文件，自动插入文件头
autocmd BufNewFile *.cpp,*.[ch],*.sh,*.java exec ":call SetTitle()"
""定义函数SetTitle，自动插入文件头
func SetTitle()
"如果文件类型为.sh文件
if &filetype == ‘sh‘
call setline(1,"#########################################################################")
call append(line("."), "# File Name: ".expand("%"))
call append(line(".")+1, "# Author: shizhai")
call append(line(".")+2, "# mail: [email protected]")
call append(line(".")+3, "# Created Time: ".strftime("%c"))
call append(line(".")+4, "#########################################################################")
call append(line(".")+5, "#!/bin/bash")
call append(line(".")+6, "")
else
call setline(1, "/**")
call append(line("."), "* File Name : ".expand("%"))
call append(line(".")+1, "* Author : shizhai")
call append(line(".")+2, "* Mail : [email protected]")
call append(line(".")+3, "* Created Time: ".strftime("%c"))
call append(line(".")+4, "*/")
call append(line(".")+5, "")
endif
if &filetype == ‘cpp‘
call append(line(".")+6, "#include <iostream>")
call append(line(".")+7, "using namespace std;")
call append(line(".")+8, "")
endif
if &filetype == ‘c‘
call append(line(".")+6, "#include <stdio.h>")
call append(line(".")+7, "#include <stdlib.h>")
call append(line(".")+8, "")
endif
"新建文件后，自动定位到文件末尾
autocmd BufNewFile * normal G
endfunc
" 在接受补全后不分裂出一个窗口显示接受的项
set completeopt-=preview
let g:ycm_show_diagnostics_ui = 0
vim插件及进阶
我的博客
vimrc
以上是 vimrc [操作系统入门] 的全部内容， 来源链接： utcz.com/z/518771.html
