华为接入S5700LI脚本配置
之前项目中经常会涉及到批量配置交换机的场景,现分享给大家。华为交换机 S5700-LI 接入模板配置如下(x.x.x.x 为ip, xxxxxxx为密码) :
systemsysname xxxx-S5700-LI-14
clock timezone BJ add 08:00:00
snmp-agent community read abcdtest
snmp-agent sys-info version v2c v3
dhcp enable
dhcp snooping enable
error-down auto-recovery cause bpdu-protection interval 30
error-down auto-recovery cause efm-threshold-event interval 30
undo nap slave enable
y
dhcp option82 circuit-id format user-defined "%portname"
dhcp option82 remote-id format user-defined "%sysname"
#
vlan 499
quit
vlan 955
quit
# mstp config
stp enable
stp mode mstp
stp region-configuration
region-name bj-lskb
revision-level 1
instance 0 vlan 499 955
active region-configuration
vlan 955
dhcp snooping enable
dhcp snooping arp security enable
quit
interface ran GigabitEthernet 0/0/1 to GigabitEthernet 0/0/22
port link-type access
port-security enable
port-security aging-time 40
port-security protect-action restrict
stp edged-port enable
stp bpdu-filter enable
dhcp option82 insert enable
quit
vlan 955
port GigabitEthernet 0/0/1 to 0/0/22
quit
interface GigabitEthernet 0/0/24
des up-to-201.190
dhcp snooping trusted
port link-type trunk
port trunk allow-pass vlan 499 955
interface GigabitEthernet 0/0/23
port link-type trunk
dhcp snooping trusted
port trunk allow-pass vlan 499 955
int vlanif 1
undo ip add dhcp-all
quit
undo int vl 1
interface Vlan499
undo shut
ip address x.x.x.x 255.255.255.0
ip route-static 0.0.0.0 0.0.0.0 x.x.x.x
ntp unicast-server x.x.x.x
ntp unicast-server x.x.x.x preference
telnet server enable
aaa
local-user admin password cipher xxxxxxxx
local-user admin service-type telnet
local-user admin privilege level 15
quit
user-interface vty 0 4
authentication-mode aaa
以上是 华为接入S5700LI脚本配置 的全部内容, 来源链接: utcz.com/z/509896.html